How Do I Find The WPS?

How do I find the WPS on my router?

Verify that the router and the internet capable device supports the WPS feature:Look on your modem or router to see if it has a WPS button:Go into the Network menu of your internet capable device to see if the WPS option is available..

What is WPS push button?

Using the WPS (Push Button) feature to connect to a wireless network. … Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network.

Where is the PIN number on a router?

Type in 8-digit PIN code, you can find it on the label at the bottom of the device. Click Next, the router will set a WPA2-Personal password for your wireless network automatically. You need remember the password. It is the key of your wireless network.

Is the WPS button the same as the reset button?

Most models of TP-Link routers can be reset by holding down the reset button for 6 to 10 seconds; on some models, the Wi-Fi Protected Setup (WPS) and reset buttons are the same, but the same procedure applies.

Does the WPS light need to be on?

The WPS will only light up when it is in a connection state. Then, the light goes off until you connect another device using the WPS method.

How long do you have to press the WPS button?

120 secondsPress the WPS button on the device you wish to connect. Within 120 seconds, press the WPS button on the wireless router. Note: You will need to press and hold the WPS button on the wireless router for about 2-3 seconds. After a short period of time, your device and the wireless router will be connected.

How do I turn on the WPS button?

To turn on / off WPS, the security type must not be set to None or WEP.Access the router configuration main menu. … From the Top menu, click Wireless Settings.Click Basic Security Settings (on the left).Under Turn Wireless On (step 6 on the Basic Security Settings section), ensure WPS is set to On / Off.More items…

What is a WPS PIN number?

You can set up a connection by entering the WPS PIN (Personal Identification Number) code of the receiver into your wireless LAN router/access point to authenticate the connection between the devices. … The PIN code (8 digits) of the receiver appears on the TV screen.

Where do I enter WPS PIN code?

Using WPS PIN Mode to Connect to a NetworkOpen the input tray.Press and hold the Wi-Fi on/off button and the Wi-Fi connect button on the scanner simultaneously for at least three seconds, then release them when the Wi-Fi on/off light flashes blue.Enter the PIN code 01234565 on the wireless router or access point within two minutes.

What is WPS button on modem?

WPS means “WiFi Protected Setup”. It’s an easy “push button” way to connect Wireless devices to your modem. When you are connecting a device that supports WPS (say a tablet, smartphone, a PC or a WiFi extender), you have the option of using WPS instead of entering the WiFi Password.

How do you I access my router settings?

IntroductionOpen a web browser such as Internet Explorer.Go to the Address bar and enter the IP Address of your router then press Enter. For example, 192.168. … A new window prompts for a User name and Password. Type admin for User name and Password, since admin is the default user name password, and then click OK.

How can I connect to WiFi without WPS button?

If your router doesn’t support WPS, go to ‘Method 2 – Without WPS button’ opposite. 1 Plug the extender into a power socket near your broadband wireless router (e.g. in the same room). Check the extender On/Off button on the top is switched on. Wait 20 seconds for the extender to boot up.

What does a WPS PIN look like?

The WPS PIN is displayed on the LED screen of the printer when you trying to wirelessly connect your computer to it. This has nothing to do with your router. If your computer has located your network printer, then it will ask you for a WPS PIN. Just look for the generated PIN on your printer screen.

Is the WPS pin the WiFi password?

WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols. … In a standard setup, you can’t connect a wireless device to a wireless network unless you know the network name (also named SSID) and its password (also called WPA-PSK key).

What happens when I press the WPS button on my router?

The device is automatically connected to the wireless network without entering the network password. … Connect them to your wireless network by pressing the WPS button on the router and then on those devices. WPS automatically sends the network password, and these devices remember it for future use.